Particulate filter UGET3+
Exhaust gas purification is an ever evolving technology and Bersy are continually improving their range of exhaust gas purification systems in order to offer the most advanced, long lasting and reliable solutions.
After many years of research and development into improving exhaust emissions, Bersy now presents this innovative exhaust gas filtration system.
The environmental and health advantages are clear, enabling customers to meet the very stringent regulations laid down by Government Health and Safety executives.
The UGET 3 + is a dry particulate filter system capable of reducing particulate matter by over 99%.
Very fine unburnt carbon particles are responsible for the typical black smoke emitted from a diesel engine exhaust, they are the main cause of many respiratory illnesses and also have a damaging effect on the environment.
The UGET 3 + filter for marine application is manufactured entirely in AISI 304 Stainless Steel and supplied together with a security by-pass valve and removable insulation.
The filter cartridge is fire & heat resistant (to 200°C) and also resistant to aggressive elements contained in the exhaust gases.
The texture weave of the special fibers retains carbon particles as small as 20nm.
The filter system is fitted in addition to the existing exhaust system and the fibrous material of the filter element traps the carbon particles, retaining them in the filter allowing the remaining exhaust gases to pass through.
UGET 3 + filters are available in various standard sizes and are supplied complete with cartridge ready for immediate use.
As well as standard models shown here, Bersy can produce units suitable for even larger engines to suit customers’ individual needs.
Bersy recommend that the UGET 3 + filter is fitted as far away as possible from the engine to avoid any problem with the filter overheating.
The filter housing should be fitted to the vehicles frame or body with fixing brackets and connected with a piece of flexible pipe, using the counter flanges supplied, to the existing exhaust outlet.
It is advised to fit the UGET 3 + filter system after the silencer.
The filter does not require any scheduled maintenance.
At the end of the filter cartridge life, the back plate and cartridge are removed and replaced with a new one.
Used cartridges are not classed as hazardous waste but must be disposed of as special waste.
Bersy suggest verifying local regulations for the disposal of used cartridges.
The life of the filter element depends on the condition and maintenance of the engine.
PRESSURE CONTROL KIT
In order to check the efficiency of the system an additional control system is available separately to verify the back pressure created by the filter.
Through a LED the pressure control kit shows the operator the filter is working correctly or if any necessary maintenance is required.
Also available is the ECU BYBOX, an advanced control system to monitor temperature and pressure, storing the related data values for evaluation later.
BACK PRESSURE TESTS
Back Pressure tests have been carried out to record the pressures caused by the filter at different stages of its life. The graph shows average values observed.
Il grafico mostra la media dei valori rilevati.
||fino a KW 12
||fino a KW 22
||fino a KW 45
||fino a KW 68
||fino a KW 113
||fino a KW 170
||fino a KW 227
||fino a KW 340
Supplied with counter flange, gasket, bolts and nuts.
FOR MORE INFORMATION DOWNLOAD THE PDF
Disclaimer: the information and dimensions shown are correct at time of press. Due to technological advancements are subject to change without notice.